Chevrolet Car & Truck Parts Articles



Worn Out Part


Used Forklift Parts Should You Choose Rebuilt Or Remanufactured Parts?

After some time parts on your forklift will wear out and will need to be replaced. When replacing these worn out parts you have the option of going with new parts, which can get costly, or you can get used parts to save on money. When dealing with previously used parts your best option is to acquire used forklift parts that have been remanufactured. This will ensure that you are getting parts that will indeed work well for a long time.

Rebuilding Versus Remanufacturing

Remanufacturing of broken, worn out parts is a most cost effective method in the long run, better than simply rebuilding a broken worn out part. In the process of rebuilding a worn out part only the components that are worn out or broken are replaced. This means that other wearable parts may or may not go out shortly after purchase.

Remanufactured parts give the best guarantee in used parts since the part is taken apart and cleaned then all wearable components are replaced. The wearable components are replaced regardless of wear or age. This ensures that any component within the part is new thus offering a longer life to the used part. The cleaning process will vary depending on the used forklift parts that are in question, as will the entire process of remanufacturing.

Replacing And Testing Parts

The engines are oven cleaned after complete disassembly. The engine can be remanufactured with several parts being replaced, which include the pistons, rings, bearer, spark plugs, lifters and valves along with the valve springs. After reassembly, the engines are hot tested to ensure that there are no leaks, problems with oil pressure, noises or any vacuum.

Transmissions are also oven cleaned after being disassembled, and then they are pressure washed. A thorough inspection is done to ensure there are no cracks in the cases. Bearings, bushings and seals are replaced. Replacement parts meet O.E.M specifications are used on component in the transmission.

Wearable Parts

The alternator, starter, water pump, torque converters and steer axles can also all be remanufactured with all wearable parts replaced giving them longer serviceability. The control card is the electronic control in an electric forklift this can also be remanufactured by replacing all worn and aged components. Unlike all other parts, the control card should only have worn and aged components replaced.

OEM Specs

Upon reassembly, the remanufactured parts will be thoroughly inspected to ensure that they are of top quality before being sold. Make sure that when you look to obtain remanufactured parts that they have undergone thorough inspection and testing. OEM specification replacement parts should be used on transmissions, steer axles and engines.

Check with the dealer to ensure that the used forklift parts that they have remanufactured meet these specifications, as this will ensure that you are getting parts that meet industry standards. As you can see, there are a lot of details that go into remanufacturing used parts. In the long run though it is this detail that will give you more serviceability out of these parts than those parts that were simply rebuilt.

Ernest Jarquio is a successful Webmaster and publisher of Forklifts-n-Pallets.com. He provides more resources on topics such as used forklift parts, pallet wrappers and walkie stackers that you can research on his website even while lounging in your living room.


Auto Parts Original Nissan Parts For Your Cars

Earlier Nissan car owners and enthusiasts looking Nissan auto parts had primarily two options. One, they could buy the required parts through certified Nissan dealerships at the high rates second, they could look the desired parts with local dealerships, which is a pure luck based option.

Nowadays, with the popularity and the increasing demand for original Nissan parts, a third way has been evolved to provide some relief to the Nissan car owners. It is mainly due to the fact that an exclusive group of automotive experts have brought their specialized knowledge to the Internet, facilitating knowledge and other information in few clicks and relatively short span of time. Now, you can get the desired information very easily and conveniently. Offering direct access to manufacturers and removing unnecessary middlemen, these innovative websites make it possible to find precisely the parts you need in mere minutes.

Nissan Auto Parts and Customer Service

Online shopping allows you to choose your original Nissan auto parts in the convenience and comfortability of your own home. You can further get the most affordable and customer friendly parts that will enhance the performance of your car.

Choosing online Nissan car parts is very important in today’s developing world. In fact, car enthusiasts and car owners seeking Nissan JDM parts or any other accessories may well find both price and service dramatically improved. It is because of the fact that an online environment allows only best companies to provide their services that too around the clock.

Therefore, it is advised to stay ahead of the competition and choose the possibilities of the online auto parts market today. Once you avail the services of the online auto market, you’ll be astonished with the quality service and affordable rates in a short span of time. If you’re serious about saving time and money, you owe it to yourself to consider these robust new options.

Myself webmaster of http://www.rhdjapan.com which dealing in all type of motor parts for your cars such as JDM parts, Honda JDM parts, Nissan JDM Parts, Mazda JDM Parts and other more parts.


Go With Used Parts Rather Than New Car Parts

Use car parts are fine to use if you are like me! I like every thing new. Don’t worry use parts in this manner are just fine. The only thing I would do is put white lube on your window track and door lock linkages. The only thing I wouldn’t use is the plastic clips if you cant get them.

For brake booster rebuilds, the two with the best reputation are “Booster Dewey” and “Karps”. Karps is the one I use. If you are looking for a source of rebuilding kits, I’m not going to be able to help you, as I’ve not run into a source for them. If you are a member of a club, post your question on there web site someone will have an answer for you. WPC is the main Chrysler club, as you probably know, but I’m sure there is a 300 club also.

Some vendors advertise new heater cores on eBay all the time, so I’d look there first. I tried that on my 67 Imperial, and they couldn’t help me. But I’ve found that a good radiator shop can rebuild and even rescore any heater core I’ve ever had to repair. I have gotten rebuilt power brake boosters for 64 Chryslers from AutoZone and from NAPA in the past – they are another source at around $100 exchange.

I can tell you my experience, I use Silicon Grease, and available at most auto parts places as it is designed for this purpose. It is clear grease in a tube, with a consistency similar to that of Vaseline, but without any petroleum content, so it will not attack the rubber or any plastic you put it on – it is totally inert in that respect.

It is used in space instruments for this exact reason and I’ve always used it on my cars -it keeps the weather-striping and rubber bumpers under the hood etc. just like new. I put it on in a thin coat with my fingers, rub it in a bit, and then wipe off any excess that might come in contact with someone’s clothing. GE makes it, and so does Dow-Corning. The DC part number is DC-4. I got my last tube from the NAPA store – it was the GE brand, but it is just the same to use and the way it works.

I have a 1996 Jetta Trek with a door lock problem. The locking mechanism fails to actuate any doors other than the one in which I actually use a key. And, after using the key, I heard the vacuum pump running too long, as well as the telltale hissing which revealed a leak under the dash on the d-s. This all seemed to happen after I had a stereo system installed.

Running speaker wire, they must have inadvertently broke my vacuum tubing connector, right at the wire-air-line harness between the inside lower part of the d-s door and the chassis where it all feeds through the body into the fuse box area above the pedals. The tubing connector nipple is sheared off, and I have two flush ends, which of course will not seal when I reconnect the harness.

Get some vacuum tubing from your local car parts store like they use under the hood on engines, and make sure it’s just big enough to push that little plastic pipe into, but not so big that it slides right in. There shouldn’t be a need to even glue it or seal it if the fit is tight enough.

Victor Epand is an expert consultant at http://www.UsedCarPartSell.com. Used Car Part Sell is a community of various independent used car part sellers from around the world. Each used car part seller represents a unique style of products all their own. If you have used car parts to sell, click here to create a Car Parts Account.

Related Article

Aftermarket Car Parts

Factory parts are just replacement parts. Aftermarket parts and accessories are usually better and often offer higher performance than stock parts.

Read the complete article on After Market Car Parts

Aftermarket Car Parts Main Menu

copyright 2008 Aftermarket Car Parts